PLANET ICA-5250V - Manual (Page 16)

Connect power adapter first, then connect the IP Camera to PC or network, and set up the
network configurations according to the network environment. The following picture shows a
DC 12V connector for adapter jack plug.
1. In order to ensure IP66 waterproof level, please install the vandal dome
according to the instructions.
a. The unused cable outlet hole must be closed, and the waterproof connector on the
used hole must be locked closely.
b. We recommend the bottom of housing be set on the smooth flat and closely seal with the
surface.
c. When you mount the camera housing on the ceiling or wall, please use the screws with the black
16