PLANET ICA-4200V - Manual (Page 17)

Full HD 20M IR Vari-Focal Dome IP Camera
ICA-4200V
17
2.2 Hardware Installation
2.2.1 Connector board
1. Please select the most suitable position on ceiling to install the camera.
2. Remove two screws to release the top cover of the dome and open it.
3. Set the mounting base onto ceiling and center it through the mounting hole, using the two
retaining screws for the main body, supplied by the appurtenance bag.
4. To adjust lens, move the camera body by pan and/or tilt manually and set the
zoom/focus by turning the lens to the left or right direction.
5. Connect the LAN cable to Ethernet’s switch or hub and the DC-Jack to the power
source.