beautypg.com

2 i/o control instruction – PLANET ICA-4200V User Manual

Page 13

background image

Full HD 20M IR Vari-Focal Dome IP Camera

ICA-4200V

13

2.1.2 I/O Control Instruction

Descriptions for I/O cable set:

Interface

Description

DC Power

The input power is DC 12V, 1A.
Note:ONLY use package power adapter supplied with the internet.
Otherwise, the product may be damaged.

RJ-45

(LAN socket, PoE )

Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX or 1000Base-TX
Fast Ethernet cabling. This Ethernet port built auto-negotiation
protocol can detect or negotiate the transmission speed of the
network automatically. Please use CAT-5 cable to connect the
Network Camera to a 1000Mbps Fast Ethernet network switch or hub.
Note:ONLY use one power source, either from DC or from 802.3af
Power over Ethernet.

Audio Output

(Green, Line Out)

Connect a loud speaker to the IP Camera. This is for voice alerting
and two-way audio.

Microphone Input

(Pink, Audio In)

Connect a microphone to the IP Camera.

Video Output

(BNC)

The Network Camera also provides composite video output. The
video output function is only for easy installation to check view angle
and focus. The output is not a Mega-pixel resolution. Furthermore, the
video output is off by default. Please turn on video.

Reset

(Factory Default)

This button is used to restore the all factory default settings.

DI/DO, RS-485

The 6 pin terminal block includes 1 input ports and 1 output ports, and
RS-485 D+ and D-.

Name

Cable Color

Function