PLANET EPL-2000 - Manual (Page 59)

User’s Manual of EPL-2000
By default, ingress filtering is disabled (no checkmark).
Permit Frame Type:
Determines whether the port accepts all frames or only VLAN tagged frames.
This parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on the port are discarded.
Options:
 allType
 tagged
By default, the field is set to allType.
Ingress Rate Control:
There are four kinds of Limit Rates:
1. LimitAll
2. LimitB
3. LimitM
4. LimitBMUC
Ingress Rate Control Rate
[0~1000000]
Set up the Rate of Ingress Rate.
As GEPON OLT EPL-2000 SFP Ports of GE1 and GE2 are configured in 1000Mbps Forced
Mode, the switch’s SFP Ports should also be changed to 1000Mbps Forced Mode if the
connection is to be established successfully,. Otherwise, the connection might fail.
59