PLANET EPL-2000 - Manual (Page 14)

User’s Manual of EPL-2000
2.2.2 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the GEPON OLT as
Figure 2-6 shows.
Figure 2-6
Plugging in the SFP Transceiver
 Approved PLANET SFP Transceivers
PLANET GEPON OLT supports both Single mode and Multi-mode SFP transceivers. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
1000BASE-X SFP modules:
■ MGB-SX SFP (1000BASE-SX SFP transceiver / Multi-mode / 850nm / 220m~550m)
■ MGB-LX SFP (1000BASE-LX SFP transceiver / Single mode / 1310nm / 10km)
■ MGB-L30 SFP (1000BASE-LX SFP transceiver / Single mode / 1310nm / 30km)
■ MGB-L50 SFP (1000BASE-LX SFP transceiver / Single mode / 1310nm / 50km)
■ MGB-LA10 SFP (1000BASE-LX SFP transceiver / WDM Single mode / TX: 1310nm, RX: 1550nm/ 10km)
■ MGB-LB10 SFP (1000BASE-LX SFP transceiver / WDM Single mode / TX: 1550nm, RX: 1310nm / 10km)
■ MGB-TSX SFP (1000BASE-SX SFP transceiver / Multi-mode / 850nm / 220m ~550m; -40~75
℃
)
■ MGB-TLX SFP (1000BASE-SX SFP transceiver / Signle mode / 1310nm / 10km; -40~75 ℃ )
■ MGB-TL30 SFP (1000BASE-SX SFP transceiver / Signle mode / 1310nm / 30km; -40~75 ℃ )
■ MGB-TL70 SFP (1000BASE-SX SFP transceiver / Signle mode / 1310nm / 70km; -40~75 ℃ )
GEPON OLT EPL-2000 SFP ports of GE1 and GE2 are configured in 1000Mbps Forced
Mode. If want to make the connection successfully, the switch’s SFP ports should also be in
1000Mbps Forced Mode. Otherwise, the connection might fail.
Before connecting the other GEPON OLT, workstation or Media Converter,
14