PLANET WGSW-20160HP - Manual (Page 470)

User’s Manual of WGSW-20160HP
6.14 Quality of Service Command
QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration []
Parameters:
: Port list or 'all', default: All ports
QoS Port Classification Class
Description:
Set or show the default QoS class.
If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured
QoS class.
Syntax:
QoS Port Classification Class [] []
Parameters:
: Port list or 'all', default: All ports
: QoS class (0-7)
Default Setting:
0
470