PLANET WGSW-20160HP - Manual (Page 220)

User’s Manual of WGSW-20160HP

TCP/UDP Destination
Filter
Specify the TCP/UDP destination filter for this ACE.
Any : No TCP/UDP destination filter is specified (TCP/UDP destination filter
status is "don't-care").
Specific : If you want to filter a specific TCP/UDP destination filter with this ACE,
you can enter a specific TCP/UDP destination value. A field for entering a
TCP/UDP destination value appears.
Range : If you want to filter a specific range TCP/UDP destination filter with this
ACE, you can enter a specific TCP/UDP destination range value. A field for
entering a TCP/UDP destination value appears.

TCP/UDP Destination
Number
When "Specific" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame
that hits this ACE matches this TCP/UDP destination value.
 TCP/UDP Destination
Range
When "Range" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination range value. The allowed range is 0 to 65535. A
frame that hits this ACE matches this TCP/UDP destination value.
Specify the TCP "No more data from sender" (FIN) value for this ACE.
0 : TCP frames where the FIN field is set must not be able to match this entry.
1 : TCP frames where the FIN field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP FIN
Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
0 : TCP frames where the SYN field is set must not be able to match this entry.
1 : TCP frames where the SYN field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP SYN
Specify the TCP "Reset the connection" (RST) value for this ACE.
0 : TCP frames where the RST field is set must not be able to match this entry.
1 : TCP frames where the RST field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP RST
Specify the TCP "Push Function" (PSH) value for this ACE.
0 : TCP frames where the PSH field is set must not be able to match this entry.
1 : TCP frames where the PSH field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP PSH
Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.
0 : TCP frames where the ACK field is set must not be able to match this entry.
1 : TCP frames where the ACK field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP ACK
Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.
0 : TCP frames where the URG field is set must not be able to match this entry.
1 : TCP frames where the URG field is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 TCP URG
220