12 qcl status – PLANET WGSW-20160HP User Manual
Page 203
User’s Manual of WGSW-20160HP
4.9.12 QCL Status
This Page shows the QCL status by different QCL users. Each row describ
QCE is not applied to the hardware due to hardware limitations. The maximum number of QCEs is 256 on each switch. The
QoS Control List Status screen in
Figure 4-9-14
appears.
Figure 4-9-14:
QoS Control List Status Page Screenshot
The Page includes the following fields:
Object
Description
User
Indicates the QCL user.
QCE#
Indicates the index of QCE.
Frame Type
Indicates the type of frame to look for incomming frames. Possible frame types
are:
Any
: The QCE will match all frame type.
Ethernet
: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC
: Only (LLC) frames are allowed.
SNAP
: Only (SNAP) frames are allowed.
IPv4
: The QCE will match only IPV4 frames.
IPv6
: The QCE will match only IPV6 frames.
Port
Indicates the list of ports configured with the QCE.
Action
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class
: Classified QoS class; if a frame matches the QCE it will be put in the
queue.
DPL
: Drop Precedence Level; if a frame matches the QCE then DP level will set
to value displayed under DPL column.
DSCP
: If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column.
Conflict
Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
203