PLANET WGSW-20160HP - Manual (Page 251)

User’s Manual of WGSW-20160HP
RADIUS Accounting Server Configuration
The table has one row for each RADIUS Accounting Server and a number of columns, which are:
Object Description
The RADIUS Accounting Server number for which the configuration below
applies.
 #
Enable the RADIUS Accounting Server by checking this box.  Enabled
 IP Address/Hostname The IP address or hostname of the RADIUS Accounting Server. IP address is
expressed in dotted decimal notation.
The UDP port to use on the RADIUS Accounting Server. If the port is set to 0
(zero), the default port (1813) is used on the RADIUS Accounting Server.
 Port
The secret - up to 29 characters long - shared between the RADIUS Accounting
Server and the switch.
 Secret
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
Object Description
The TACACS+ Authentication Server number for which the configuration below
applies.
 #
Enable the TACACS+ Authentication Server by checking this box.  Enabled
 IP Address/Hostname The IP address or hostname of the TACACS+ Authentication Server. IP address
is expressed in dotted decimal notation.
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
 Port
The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
 Secret
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
251