4 power over ethernet powered device – PLANET GSW-1600HP User Manual
Page 15
15
3.4 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where
UPS is installed for un-interrupt power system and
power control system.
6~12 Watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where with
no hesitation.
10~12 Watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can
install IP Camera without limits of install location – no
need electrician to install AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet
cable into 5/12V DC power output. It frees the device
deployment from restrictions due to power outlet
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
30 Watts
High Power Speed Dome
This state-of-the-art design is considerable to fit in
various network environments like traffic centers,
shopping malls, railway stations, warehouses, airports,
and production facilities for the most demanding
outdoor surveillance applications- no need electrician to
install AC sockets.
Note
Since the GSW-1600HP per PoE port supports 51V DC PoE power
output, please check and assure the Powered Device (PD) accept-
able DC power range is from 51V DC. Otherwise, it will damage the
Powered Device (PD).