PLANET GSW-1600HP - Manual (Page 12)

12
3.1 Desktop Installation
To install the 802.3at PoE+ Ethernet Switch on desktop, simply follow the next
steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the 802.3at
PoE+ Ethernet Switch, as shown in Figure 3-1.
Figure 3-1: Attaching the Rubber Feet to the 802.3at PoE+ Ethernet Switch
Step2: Place the 802.3at PoE+ Ethernet Switch on desktop near an AC power
source.
Step3: Keep enough ventilation space between the 802.3at PoE+ Ethernet Switch
and the surrounding objects.
Note
When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 4, in Specification.
Step4: Connect your 802.3at PoE+ Ethernet Switch to 802.3af / 802.3at complied
Power Devices (PD) and other network devices.
A. Connect one end of a standard network cable to the 10/100/1000 RJ-
45 ports at front panel of the 802.3at PoE+ Ethernet Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers…etc.
Note
Connection to the Switch requires UTP Category 5, 5e, 6 network
cabling with RJ-45 tips. For more information, please see the
Cabling Specification in Appendix A.