PLANET GSW-1200S - Manual (Page 27)

GSW-1200S User's Manual 21
Setting up a new trunk:
Please note that the trunk list should be empty when you first start the
Port Trunking Configuration function. To set up a new trunk, select the
function with the "Arrow" keys and then press the "Enter" key.
The Add Trunking Port Screen will display. (See Figure 3-8 Add
Trunking Port screen )
Each item shown in the Add Trunking Port screen represents a set of
ports that can be trunked together. Press "Enter" key on your desired
item to select the set as a new trunk. Note that selecting a set of ports
may cause other sets to be excluded in further selections. You may
select more than one set until the trunking ports are all being defined.
Figure 3-8 shows the example of the defined trunking ports.
Figure 3-8 Add Trunking Port Screen
The following shows the Trunking Configuration screen after trunking
ports are defined.