PLANET GSW-1200S - Manual (Page 15)

GSW-1200S User's Manual 9
2.2.1 Desktop or Shelf Mounting
To install a GSW-1200S on a desktop or shelf, simply complete the
following steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the
switch.
Step2: Place the GSW-1200S on a desktop or shelf near an AC power
source.
Step3: Keep enough ventilation space between the switch and the
surrounding objects
Note: When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1.3, Specification.
Step4: Connect your GSW-1200S to network devices
A. Connect one end of a standard network cable to the
10/100/100 RJ-45 ports on the front of the GSW-1200S.
B. Connect the other end of the cable to the network devices
such as printer servers, workstations or routers …etc.
Note: Connection to the Switch requires UTP Category 5 network
cabling with RJ-45 tips. For more information, please see the Cabling
Specification in Chapter 1.3, Specification and Appendix.
Step5: Supply power to the Switch.
A. Connect one end of the power cable to the GSW-1200S
B. Connect the power plug of the power cable to a standard wall
outlet.
When the GSW-1200S receives power, the Power LED should remain
solid Green.
2.2.2 Rack Mounting
To install the switch in a 19-inch standard rack, follow the instructions
described below.
Step1: Place your GSW-1200S on a hard flat surface, with the front
panel positioned towards your front side.
Step2: Attach a rack-mount bracket to each side of the switch with
supplied screws attached to the package. Figure 2-3 shows how
to attach brackets to one side of the switch.