PLANET GSW-1200S - Manual (Page 23)

GSW-1200S User's Manual 17
3.2.3 System Configuration
The following screen (Figure 3-5) is displayed when the System
Configuration heading is selected from the Main menu. Use the System
configuration menu to view and change the values. To change the
password, aging time, logout time or auto refresh time, use the "Arrow"
keys to move the highlight to the selection and then press the "Enter"
key. Entering the value for the highlighted selection. And then press
"Enter" again for confirmation.
Caution:
Record your new password in a safe place. There is NO method
of recovery if you forget or lost your password but return to us
for firmware code refresh.
Table 3-2 describes the objects that shown in the system configuration
menu screen.
Figure 3-5 System Configuration Menu Screen