beautypg.com

Avago Technologies 3ware 9650SE-12ML User Manual

Page 42

background image

Chapter 3. Installing the Battery Backup Unit

38

3ware 9650SE Serial ATA RAID Controller Installation Guide

4

While pressing down on the top of the battery module, lift out
the bottom of the battery module slightly.

5

Once the bottom of the module is free, slide the module up to
release the clips on the top.

Figure 32. Removing the battery module

6

Disconnect the battery power cable from the BBU.

To do so, press down on the lever-like clip on the battery power
connector and slide it out of the slot.

(If desired, you can remove the BBU control module to
facilitate disconnecting the power cable.)

Bottom clip

a) Push the battery

module down gently.

b) Lift out the bottom

of the battery module

to release the clip on

the bottom edge.

c) Lift up to remove

the clips on the top

edge.