Avago Technologies SAS 9200-8e Host Bus Adapter - Manual (Page 25)

LSI Corporation
- 25 -
PCI Express to 6Gb/s Serial Attached SCSI (SAS) Host Bus Adapters User Guide
May 2013 Host Bus Adapter Characteristics
Characteristics of the LSI 6Gb/s HBAs
SAS/SATA Connectors (J5 and J6). The LSISAS9205-8e HBA supports SAS/SATA connections through connectors J5
and J6, which are SFF-8088 mini-SAS, external, right-angle connectors.
UART Connector (J4). The UART connector debug port requires a special cable and LSI support to gather detailed
IOC status.
3.1.10.4 Physical Characteristics
The LSISAS9205-8e HBA is a 6.6-in. × 2.7-in., low-profile board. The component height on the top and bottom of the
LSISAS9205-8e HBA is in accordance with the PCIe specification. The following figure shows the board layout.
Figure 11 LSISAS9205-8e Board Layout
 EC1: PCIe x8-lane board edge connector
 J5, J6: SFF-8088 mini-SAS, external, right-angle connectors
 CR1: Heartbeat LED
 J4: UART connection
Table 24 LSISAS9205-8e UART Pinout
Pin Function
1 UART_TX
2 Gnd
3 UART_RX
4 +1.8 V
,3)3!3
*
*
*
%#
#2