Avago Technologies SAS 9200-8e Host Bus Adapter - Manual (Page 12)

LSI Corporation
- 12 -
PCI Express to 6Gb/s Serial Attached SCSI (SAS) Host Bus Adapters User Guide
May 2013 Host Bus Adapter Characteristics
Characteristics of the LSI 6Gb/s HBAs
Activity LED Header (J3). The LSISAS9210-8i HBA has a 4-pin, right-angle, 0.1-in. pitch header for driving external
activity LEDs.
UART Connector (TP1). The UART connector debug port requires a special cable and LSI support to gather detailed
IOC status.
3.1.2.4 Physical Characteristics
The LSISAS9210-8i HBA is a 6.6-in. × 2.7-in. low-profile board. The component height on the top and bottom of the
LSISAS9210-8i HBA is in accordance with the PCIe specifications.
Figure 3 LSISAS9210-8i Board Layout
 J6: PCIe x8-lane board edge connector
 J4, J5: SFF-8087 mini-SAS, internal, right-angle connectors
 J3: 4-pin, right angle, 0.1-in. pitch pin header for driving external activity LEDs
 TP1: UART connection
Table 6 LSISAS9210-8i LED Header
Pin Function
1 3.3 V
2 Port 0
3 Port 1
4 3.3 V
Table 7 LSISAS9210-8i UART Pinout
Pin Function
1 UART0_TX
2 Gnd
3 UART0_RX
4 3.3 V
LSISAS2008
J6
J3
3_00004-03
TP1
J4 J5