Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 8)

Avago Technologies
- 8 -
LSICVM01 Kit Quick Installation Guide
September 2014 Installing the LSICVM01 Kit
3.4 Attaching the CVPM02 Module to the Clip
Follow these steps to attach the CVPM02 module to the clip on the remote mount board.
1. Make sure the remote mount board is on a flat, clean, static-free surface. Ground yourself, and make sure that the
system is grounded.
2. Remove the CVPM02 module from the package.
3. Press the CVPM02 module into the clip on the remote mount board until the module clicks firmly into place, as
shown in the following figure.
Figure 5 Connecting the CVPM02 Module to the Clip on the Remote Mount Board
A
CacheVault
Power Module
Clip
3_01275b-00