Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 11)

Avago Technologies
- 11 -
LSICVM01 Kit Quick Installation Guide
September 2014 Installing the LSICVM01 Kit
3.7 Installing the Remote Mount Board in the System
Follow these steps to install the remote mount board in the computer.
1. With the power to the chassis still turned off, and the power cords unplugged, make sure that the chassis is
grounded and has no AC power.
2. Insert the remote mount board in a PCIe slot on the motherboard, as shown in the following figure.
3. Press down gently, but firmly, to seat the board correctly in the slot.
4. Secure the remote mount board to the computer chassis with the bracket screw.
Figure 8 Installing the Remote Mount Board
Bracket
Screw
Press
Here
Press
Here
3_00895-01
PCIe Slot