Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 8)

Avago Technologies
- 8 -
CVFM03 and CVPM02 CacheVault Modules Quick Installation Guide
June 2015 Attaching a CVFM03 Module to a MegaRAID SAS 9265CV-8i RAID Controller and
Connecting to a Remote CVPM02 Module
2.4 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
Follow these steps to attach the CVPM02 module to the clip on the remote mount board.
1. Place the remote mount board on a flat, clean, static-free surface.
2. Ground yourself and make sure the system is grounded.
3. Remove the CVPM02 module from the package.
4. Press the CVPM02 module into the clip on the remote mount board until the module clicks firmly into place, as
shown in the following figure.
Figure 4 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
A
CacheVault
Power Module
Clip
3_01275b-00