Avago Technologies 3ware SAS 9750-16i4e - Manual (Page 39)

Jumper and Connector Description for the 9750 Controller Card Family
www.lsi.com/channel/products 35
J1C1 Reserved for
LSI use. 3-pin connector
Reserved for LSI use.
J1L1 Remote
battery
backup
unit
connector 20-pin connector.
Connects the optional remote intelligent
battery backup unit (LSI iBBU07)
remotely to the controller by cable.
J2B1 4 Lane
SATA+SAS
connector
(Ports 12-15)
SFF-8087 x4 internal mini SAS
connector
Connects the controller by cable to SAS
drives or SATA drives, or a SAS
expander.
J2B2 4 Lane
SATA+SAS
connector
(Ports 8-11)
SFF-8087 x4 internal mini SAS
connector.
Connects the controller by cable to SAS
drives or SATA drives, or a SAS
expander.
J2D1 Standard
PCIe edge
card
connector x8 PCIe 2.0 bus connection as defined in
the PCI Express specification.
The RAID controller interfaces with the
host system using this connector.
J3B1 4 Lane
SATA+SAS
connector
(Ports 4-7)
SFF-8087 x4 internal mini SAS
connector.
Connects the controller by cable to SAS
drives or SATA drives, or a SAS
expander.
Table 10: Jumpers and Connectors for 9750-16i4e
(continued)
Jumper/
Connector
Type Description