Amprobe AMB-110 Insulation-Resistance-Tester - Manual (Page 34)

29
Recall measurement without the graph R(t):
Recall: 0006
Recall measurement with the graph R(t):
Recall: 0007 G
“0006” and “0007” represents the serial number of the stored results. G letter means the
graph R(t), if added. Results can be scrolled through by using the and keys.
To see the Graph R(t) press the SELECT key, to go back to the numerical measurement result
press the ESC key.
• The recall function can be exited by pressing the ESC or Start key.
• To clear the last stored result: highlight CLR and confirm by pressing the MEM key.
To clear the complete memory see the paragraph of Configuration.
In addition to the main result also, the sub-results and parameters of the selected function are also
recorded. The following is a list of all the data stored for each function.
Function List of stored data
Voltage
Function name
Measured voltage
Frequency the measured voltage
Ser. number of stored result
Date *
Time *
Insulation resistance
Function name
Measured insulation resistance value
Set test voltage
Actual test voltage - measured value
Actual test current - measured value
Capacitance of the tested object
Duration of the measurement
Maximum detected value of measured resistance
Minimum detected value of measured resistance
Ser. number of stored result
Date *
Time *