Amprobe AMB-110 Insulation-Resistance-Tester - Manual (Page 23)

18
Diagnostic test
Selecting this function displays the following states (initial state and state with results after the
completion of the measurement). The Fig. 14 shows states when Graph R(t) is disabled.
Initial display – numerical mode Display with results – numerical mode
Fig. 14 Diagnostic test display states - Graph R(t) disabled
The Fig. 15 shows states when Graph R(t) is enabled. After taking a measurement, you can switch
back and forth between numerical mode display and graphical mode display by pressing or keys.
graphical mode
numerical mode
Note
• It is not possible to switching mode of presentation when measurement running!!!
Initial display -
numerical mode
Initial display -
graphical mode
Display with results -
numerical modeㄇ
Display with results -
graphical mode
Fig. 15 Diagnostic test display states - Graph R(t) enabled
Diagnostic test is a long duration test for evaluating the quality of the insulation material under
test. The results of this test enable the decision to be made on the preventive replacement of the
insulation material.