Empire Comfort Systems VFP36SP32EN-2 - Manual (Page 15)

26670-0-0110 Page 15
Locating fireplace
Place fireplace in framed opening. Attach the framing brackets to
the fireplace and secure to framing. Different hole locations can
be used for finishing materials with thicknesses of 3/8", 1/2" and
3/4". Secure the brackets with screws provided using two (2) per
framing bracket. See Figure 11.
Framing brackets should fit directly against framing material. Use
at least one (1) nail or screw per bracket to secure in place.
IMpORTANT! Check squareness of the fireplace prior to securing
to framed opening. See Figure 12.
NOTE: On See-Through models, framing brackets may be placed
on one side of the facing openings. This allows the fireplace to be
inserted into the pre-framed opening.
Figure 11
CHECK TO SEE
THAT BOX IS SQUARE
PRIOR TO ATTACHING TO
FRAMING
FIREPLACE OPENING
Figure 12
FIREPLACE INSTALLATIoN INSTRUCTIoNS (continued)
ATTACH (4)
FRAMING BRACKETS
TO SIDE(S) OF FIREPLACE
PRIOR TO INSTALLING
UNIT TO FRAMED OPENING