Edirol V-44SW E1 - Manual (Page 57)

57
Menu List
6. Wipe Select
Parameters Explanation Sub Menu
1: Wipe Sw1 Sets WIPE [1] button Refer to “Wipe Sw Sub Menu” below.
2: Wipe Sw2 Sets WIPE [2] button
3: Wipe Sw3 Sets WIPE [3] button
4: Wipe Sw4 Sets WIPE [4] button
Wipe Sw Sub Menu
Parameters Explanation Values
1: Wipe Pattern Wipe pattern setting Horizontal, Vertical, Horizontal Open, Vertical Open,
Box, Cross
2: Wipe Reverse Reverses the direction of the wipe effect Off, On
3: Wipe Edge Type Soft edge type setting Hard, Soft
4: Wipe Reset The sub-menu settings are returned to their
factory default settings --- (Procedure:
☞
p. 29)
7. Panel Preset Edit
Parameters Explanation Values
1: Copy Copies the panel preset --- (Procedure:
☞
p. 43)
2: Exchange Exchanges the panel preset with a different panel preset --- (Procedure:
☞
p. 43)
3: Preset Play Select Settings for each parameter in the registered content to be
called up Refer to “Preset Play Select Sub Menu”
below.
4: Set Preset Fade Time Fade-out time when switched with PANEL PRESET 0.0–4.0 (sec.)
5: Preset Reset The sub-menu settings are returned to their factory default
settings --- (Procedure:
☞
p. 29)
Preset Play Select Sub Menu
Parameters Explanation Values
1: Output Fade Output Fade Mode and OUTPUT FADE Level settings Free, Load
2: Input Channel select button’s setting Free, Load
3: P in P P in P effect settings Free, Load
4: Key Key composite effect settings Free, Load
5: Transition TRANSITION select button’s setting Free, Load
6: Preset Play Reset The sub-menu settings are returned to their factory default
settings --- (Procedure:
☞
p. 29)
Wipe effect settings are made here.
Panel presets are managed here.
V-44SW_e.book 57 ページ ２００６年１０月２３日 月曜日 午後３時２５分