Edirol V-44SW E1 - Manual (Page 46)

46
Using the V-44SW with Other Devices
■
Controlling the V-44SW from an External Device Via MIDI
When V-LINK mode (p. 48) is off, you can transmit the unit’s button and knob operations using MIDI messages.
Conversely, you can also use MIDI messages transmitted by external devices to control the V-44SW’s button and knob settings.
● For more details about MIDI messages, refer to the MIDI Implementation. The MIDI Implementation can be
downloaded from the Roland Systems Group website. http://rolandsystemsgroup.net
You can use MIDI to link operation of multiple V-44SWs.
● If Linking Operation of Multiple V-44SWs
Select “9. MIDI Setup” from the menu and set “4: MIDI Out/Thru Switch” as follows.
Master V-44SW: Out
V-44SWs other than the master: Thru
● If Linking Operation to Use Multi-Screen Output
For instructions on linking operation of V-440HDs and V-44SWs, refer to “Using the V-44SW with a V-440HD for Multi-Screen
Output” (p. 44).
You can stop reception of MIDI signals temporarily by pressing the [MIDI] button so its light is turned off. This stops linked
operation via MIDI and enables independent functioning of one individual V-44SW.
To restore linked operation through MIDI, press the [MIDI] button once more so the button is lit.
Linking Operation Via MIDI
Temporarily Cutting Linked Operation
9
8 7
12
2
1
4 5
3
3 OUTPUT FORMAT Button
1 [MIDI] Button
2 PANEL PRESET Buttons
4 [TIME] Knob
5 [OUTPUT FADE] Button
12 [P in P] Button
11 [KEY] Button
10 TRANSITION Select Buttons
8 SD VIDEO [1]–[4] Buttons
7 HD/RGB [1]–[4] Buttons
6 [TAKE] Button
9 [TRANSITION TIME] Knob
6 11
10
V-44SW_e.book 46 ページ ２００６年１０月２３日 月曜日 午後３時２５分