beautypg.com

Enterasys Networks Enterasys RoamAbout TRPZ-MP-422 User Manual

Page 4

background image

CUSTOMER RELEASE NOTES

1/21/09 P/N: 9038177-27

Subject to Change Without Notice

Page: 4

of 28


F0615-O

SUPPORTED FUNCTIONALITY:

Please refer to the following documents available at

http://secure.enterasys.com/support/manuals

for more details

on new 7.0 enhancements and overall functionality:

RoamAbout Switch Manager 7.0 Configuration Guide

RoamAbout Mobility System Software 7.0 Command Reference Guide

RoamAbout Switch Manager 7.0 Management Guide

RoamAbout Mobility System Software 7.0 Feature Guide

RoamAbout Switch Manager 7.0 Feature Guide

RoamAbout Mobility System Software 7.0 Configuration Guide

RoamAbout Switch Manager 7.0 Planning Guide

RoamAbout Mobility System Software 7.0 Quick Start Guide

RoamAbout Switch Manager 7.0 Quick Start Guide

New Product Features in Release 7.0

Enterasys Virtual Controller Cluster

TRPZ-MP-432 to support 802.11n

Layer 2 ACL Enhancements

Snoop Filter Enhancements

Bandwidth Management by User and SSID

Dynamic RADIUS Extensions

MAC User Range Authentication

MAC Authentication Request Format

Additional User AAA Attributes for User Name and
Simultaneous Logins

Group-based Authentication and Authorization

Location Policy Enhancements

RADIUS Ping

RF Enhancements

Mesh Enhancements


NOTES:

 Local switching is only available in RAS firmware version 6.0 and higher.
 Restricting Layer 2 forwarding for a VLAN is not supported if the VLAN is configured for local

switching.

 The DHCP restrict feature is not supported for locally switched clients.
 Web Portal is not supported for locally switched clients.
 IGMP snooping is not supported with local switching.
 Locally Switched A

P‘s can support a total of 25 ACL rules, including both inbound and outbound

ACLs.

 For Wireless bridging, here are some best practice guidelines:

o When connecting a Mesh Portal to the network, use only ethernet port 1 on the AP.
o Because all AP CPU cycles are devoted to bridging, make other arrangements for service

coverage in the bridge area as the endpoints cannot provide other wireless services.

o A single radio must be devoted to maintaining the bridge.