Whelen CANWC1 - Manual (Page 3)

Page 3
Specifications
General
Input Voltage
12 VDC ±20%
Negative Ground Only
Main Input Current 80 Amps Max.
Main Input Fuse 2 Fuses @ 40 Amps ea.
Standby Current (backlight off) Ign.On - 80mA (typ) / Ign.Off - 100 uA (typ)
Operating Temperature -30°C to +60°C
Storage Temperature -40°C to +70°C
Humidity 99% (Non-condensing)
Amp/Relay Module
Audio Bandwidth @ 25 Watts
300 to 10000 Hz ±3db
Distortion @ 25Watts 1% Maximum
Output Voltage @ 15VDC @11 ohms 24Vrms Maximum
Speaker Impedance 5.5 Ohms Minimum
Outlet Current
LED Outlets J2 & J4 (32 Total)
2.5A Each (Internally Limited)
Note: Total combined current not to exceed 40 Amps
High Current Outlets J1 (8 Total) 10A Each (Fused)
Note: Outlets J1-5 thru J1-8 may be Positive or Negative activated
Note: Total combined current not to exceed 40 Amps
LC AUX Outlets (J4-1, J4-2, J4-11) 250mA Each (Internally Limited)
Input Operation
Logic Inputs 1-4
Positive or Negative Activation
Logic Inputs 5-8 Positive Activation Only
Analog Inputs 1-3 0 - 12VDC
Ignition Sense Connected to 12VDC Ignition Switch
Dimensions (Amp/Relay Module)
Height 3.25 inches
Width 7.62 inches
Depth 9.50 inches
Dimensions (Control Head)
Height 3.58 inches
Width 6.85 inches
Depth 1.32 inches