Whelen DBKT6 User Manual

Automotive: lightbars

Page 1

Installation Guide:

Dominator™ mounting bracket

Model DBKT6 / 2012 Tahoe Hatchback

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]

For warranty information regarding this product, visit www.whelen.com/warranty

Automotive:

Lightbars

Installation:

This bracket mounts to the
rear window latch housing.
1. Remove the end cap on

the Dominator™ and add a
fourth carriage bolt, then
replace the end cap (Fig.
3).

2. Remove the 2 existing

christmas tree plugs on
either side of the window
latch and install 2 rivnuts.

3. Install the bracket onto the

vehicle and install the
Dominator™ lightbar onto the bracket using the supplied mounting hardware (Figs. 2 & 4).

IMPORTANT! It is the responsibility of the installation technician to make sure that the installation and operation of this
product will not interfere with or compromise the operation or efficiency of any vehicle equipment. Before returning the
vehicle to active service, visually confirm the proper operation of this product, as well as all vehicle components/equipment.