KEPCO MAT Full Rack MAT 6V, 15V, 25V AND 36V MODELS - Manual (Page 20)

MAT 6V/15V/25V/36V/ 022300 2-3
FIGURE 2-2. REAR VIEW OF THE MAT FULL RACK POWER MODULE
TABLE 2-3. REAR TERMINATIONS, MAT POWER MODULE
ITEM NO.
(See Fig. 2-2)
REAR TERMINATION FUNCTION
1
DC OUTPUT
CONNECTOR
Connects the MAT power module output lines, sensing lines and ground line to
the load (connector supplied). Refer to figure 2-2 for pin designations.
2
CONTROL BUS
CONNECTORS
Connects MAT power module to the IEEE 1118 control bus. Two connectors (in
parallel) allow daisy chain connection of up to to 27 MAT power modules to be
connected (daisy chained) to the power module controller via the control bus
(see par. 1.2).
3
AC INPUT POWER
CONNECTOR
Accepts three prong a-c input female plug (supplied).
TABLE 2-4. DC OUTPUT CONNECTOR PIN FUNCTIONS
PIN FUNCTION
B OUTPUT TERMINAL 1
E OUTPUT TERMINAL 2
C SENSE TERMINAL 1
D SENSE TERMINAL 2
A SAFETY GROUND