Subaru Robin EH72 FI - Manual (Page 26)

20
ENGLISH
10. PREPARATIONS FOR STORAGE
ENGINE OIL
Change the engine oil with fresh oil.
Remove the spark plug, pour about 5
cc of engine oil into the cylinder,
slowly start the engine for 2 or 3
seconds, and re install the spark
plug.
USE UP THE FUEL
If you will not use the engine for more
than 1 month, run the engine until there
is no fuel left, and then store the
equipment in a location with low
humidity in order to prevent start-up
problems and operation trouble due to
deterioration of the fuel.
CLEAN AND STORE
Remove the spark plug wires from
the spark plugs.
Slowly turn the crankshaft until
resistance is felt and leave it in that
position.
Clean the engine thoroughly with an
oiled cloth, cover the engine, and
store the engine indoors in a well
ventilated, low humidity area.
Flame Prohibited WARNING