TA Triumph-Adler DC 2315 - Manual (Page 62)

Section 6 COPY DEFAULT SETTINGS
6-12
It is possible to use the operation panel to check the total number of
copies made. It is also possible to print out that information in the
form of a report.
1
Press down on the Stop/Clear key for at least 3 seconds.
The copy count will begin to be shown on the copy quantity/
magnification display.
2
The copy count will be shown in three portions in the
following order. (In this example, the total number of copies
made is 1,234.)
NOTE
If you press the Start key while the total copy count is
being shown, the Total Count Report will be printed out.
If you are going to print out the Total Count Report,
make sure that there is 8
1/2 " × 11" (Letter) or A4 paper
either loaded in a drawer or set on the multi-bypass tray.
Sample Total Count Report
3
Once the total copy count has been shown, the copier will
return to a copy-ready state.
Checking the total copy count and printing out a report
(1) (2) (3)