TA Triumph-Adler DC 2315 - Manual (Page 44)

Section 5 COPY FUNCTIONS
5-4
1
Press the 2in1/4in1 key until the 2in1 indicator lights.
NOTE
It is possible for you to change the type of borderline.
(See “Selecting the borderline” on page 5-6.)
2
Set the original(s).
3
Press the Start key. Scanning of the first original will start.
NOTE
If the optional Document Processor is installed on your
copier, all of the originals set there will be scanned and
the copy operation will start.
4
Once scanning of the first original is completed, “1-” (the
number of originals already scanned) will be shown. Set the
next original and press the Start key. Carry out this step as
well for the rest of the originals that you want to copy.
5
Once you have finished scanning all of the originals, press
the Recall%/Enter key or the 2in1/4in1 key.
Copying will start.