TA Triumph-Adler DC 2315 - Manual (Page 58)

Section 6 COPY DEFAULT SETTINGS
6-8
8
Press the Recall%/Enter key. The operation panel will
return to the display in step 2. Once you are finished
accessing default items, proceed to step 19.
9
Press the Number of Copies / Zoom(+) or the Number of
Copies / Zoom(-) key to set the copy limit. (The setting can
be made to any number up to “99”.)
(F16)
10
Press the Recall%/Enter key. The operation panel will
return to the display in step 2. Once you are finished
accessing default items, proceed to step 19.
11
Press the Start key. A pattern like that shown in the
following illustration will be printed out.
(F27, F28 and F29)
NOTE
Be sure that there is 8 1/2 " × 11" (Letter) or A4 size paper
in the location (a drawer or the multi-bypass tray) to be
adjusted.
12
Fold the printed sheet up the middle and compare the true
center with the printed center line.
13
If the result is as shown in example (1), increase the
setting. If the result is as shown in example (2), decrease
the setting.
NOTE
For each tenth (0.1) that you increase the setting, the
image will be moved 0.1 mm to the left.
(printed center line)
(1)
(2)
+
–