TA Triumph-Adler DC 2023 - Manual (Page 38)

-36-
4. Macintosh PPD dialog boxes
4-2 Page Setup dialog box
Settings for paper size, page layout, magnification ratio and print direction (orientation) are performed in the Page Setup dialog box. To display the
Page Setup dialog box, select Page Setup… in the File menu of the corresponding application.
* The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application and the version of
LaserWriter that you are using.
A Paper pop-up list: Select in this pop-up list the desired paper size. Choose from among Letter, Legal, Folio, Statement, A3, A4,
B4-JIS, A5, B5-JIS, A6, B6-JIS, Envelopes (Monarch, Com-10, DL, C5) and Custom sizes.
* ALWAYS use the multi-bypass to feed the following sizes: A6, B6-JIS and Envelopes (Monarch, Com-10, DL, C5)
* When Custom is selected, the paper size can be set as desired. The acceptable paper width is between 98.4 mm - 297 mm
(metric) or 3.88" - 11.69" (inches). The acceptable paper length is between 148 mm- 431.8 mm (metric) or 5.83" - 17.00"
(inches).
B Layout pop-up list: Select in this pop-up list the desired layout option.
C Reduce or Enlarge field: Type the desired magnification ratio directly into this field. Select a ratio between 25% - 400%.
D Orientation icons: Enable selection of the desired print direction.
E OK button: Click to close the Page Setup dialog box and save all of the currently selected settings.
F Cancel button: Click to cancel the new settings.
G Options button: Click to open the Options dialog box. For more detailed information regarding the Options dialog box, refer
to “4-3 Options dialog box”, page 37.
H Help button: Click to display the Help window related to the Page Setup dialog box.
A B C
E
F
G
H
D