TA Triumph-Adler DC 2023 - Manual (Page 35)

-33-
3. “WinPanel” Status Monitor
3-3 Status messages and icons
If trouble occurs, refer to the Instruction Handbook for your copier and for your printer for more detailed information.
Status Message Status Icon Status
Power off/Cable Problem The printer cable is not connected correctly to the printer and your computer.
Warming up The printer is now warming-up.
Ready Printing is possible.
Paper Jam
A paper jam has occurred in the printer or in one or more of the installed optional
accessories.
Printer Overrun
When trying to print documents containing complex data, the speed your computer sent
data for printing did not match the speed of the print engine and printing was not
accomplished properly.
Memory Overflow The printer memory has become full during reception of data for a print job.
No Drawer The selected drawer is not set properly in the printer.
Paper Mismatch The size of the document is different than the size of paper loaded in the selected drawer.
Cover Open One or more of the covers to the printer or to the optional accessories are open.
Paper Empty There is no paper in the selected drawer.
Toner Empty There is insufficient toner in the printer.
Service Call
An electrical or mechanical problem has occurred. Contact your service representative or
an authorized service center.
Staple Empty The optional Finisher has run out of staples.