TA Triumph-Adler CX 8682 - Manual (Page 90)

CHAPTER 8 TROUBLESHOOTING
8-8
(Inch)
(Metric)
1 2
3
4
5. Countermeasures against Call for service Message
If the message “Call for service” appears, the machine has detected
abnormal conditions. Stop use of this machine and follow the
procedure below.
Pull the main body release lever to open the main body and
then close the main body. If the same message remains, make a note of the displayed
error code (C xxxx in the example above).
Turn the main power switch off(O) and disconnect the power
cord.
Contact your service representative. At this time, report the
error code above.