TA Triumph-Adler CX 8682 - Manual (Page 78)

CHAPTER 7 MANAGEMENT AND SETTING
7-20
1
2
2
(Inch)
(Metric)
1
1
2
(Inch)
(Metric)
1
2
(Inch)
(Metric)
(Inch)
(Metric)
@ @ @ @ @ Method copy start
Press the ▼ or ▲ key to select the desired copy start
method.
Press the OK key. The machine will return to the copy default
setting screen.
# # # # # Start late time
NOTE
• If “ @ Method copy start” is set to “Start key”, this item cannot be set.
Press the ▼ or ▲ key to select the desired delay time for
auto start.
The time can be set to from 0.5 second to 5 seconds.
Press the OK key. The machine will return to the copy default
setting screen.
$ $ $ $ $ Paper cut [Select cut. Method]
NOTE
• The sizes displayed depend on the setting of “ # Standard size set” of
the machine default setting.
Press the ▼ or ▲ key to select the desired cut size.
Press the OK key. The machine will return to the copy default
setting screen.
% % % % % Sync. Cut length
To display the synchronized cut length, press the ▼ or ▲ key
to select “ON”.
Press the OK key. The machine will return to the copy default
setting screen.