TA Triumph-Adler CX 8682 - Manual (Page 39)

CHAPTER 5 FUNCTIONAL COPYING
5-6
10
(Inch)
(Metric)
11
12
13
14
(Inch)
(Metric)
15
16
17
6
7
8
(Inch)
(Metric)
9
The shift direction and the shift amount will be displayed in
the top line of the message display.
• To change the settings, press the
▼ or ▲ key to select
"Change".
• To accept the settings without change, ensure that “ON” is
selected.
Press the OK key.
• If “Change” has been selected, proceed to the next step.
• If “ON” has been selected, proceed to step 10.
Press the ▼ or ▲ key to select up or down and change the
shift amount using the numeric keys.
Press the OK key.
> Setting of shift to right or left
To shift the image to the right or left, press the ▼ or ▲ key to
select “Side”.
To complete the setting, ensure that “End” is selected and
press the OK key. The machine will return to the basic
screen.
Press the OK key.
The shift direction and the shift amount will be displayed in
the top line of the message display.
• To change the settings, press the
▼ or ▲ key to select
“Change”.
• To accept the settings without change, ensure that “ON” is
selected.
Press the OK key.
• If “Change” has been selected, proceed to the next step.
• If “ON” has been selected, proceed to step 16.
Press the ▼ or ▲ key to select right or left and change the
shift amount using the numeric keys.
Press the OK key.
To complete the setting, ensure that “End” is selected and
press the OK key. The machine will return to the basic
screen.
> Canceling all image shift settings
To cancel all image shift settings, press the ▼ or ▲ key to
select “Cancel” and press the OK key. The machine will
return to the basic screen.