TA Triumph-Adler FAX 941 - Manual (Page 35)

3-2
Setting your machine
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
Access to the Web server
Open a Web browser from a PC registered on the network.
Enter the IP address of the terminal you want to configure in the address field.
Confirm by pressing ENTER.
The welcome window is displayed. Select the interface language.
Modify the parameters you want to change on the screen then confirm.
M
AIN SETTINGS
At the first power on, set-up the date and time, the network type, the language and check the others
parameters shown hereafter.
B
EFORE TRANSMISSION
Date/Time
At any moment you may change the date and time on your fax machine.
To change the date and time:
M 21 OK - SETUP / DATE/TIME
Enter the numbers of the required time and date one after another,
(for example November 8 2004 at 9h33, press 0 8 1 1 0 4 0 9 3 3) and press OK to confirm.
Your fax number/your name
Your fax will print out your fax number on each document it transmits if you save this number and if
the machine is set to
SENDING HEADER (refer to paragraph Technical parameters, page 3-7).
To save your fax number and your name:
M 22 OK - SETUP / NUMBER / NAME
Enter your fax number (20 digits max.) and press OK to confirm.
Enter your name (20 characters max) then press OK to confirm.
Type of network
You may connect your fax to either a PSTN or private network such as private automatic branch
exchange (PABX). You must select the network which is the most convenient.