Emerson Radio CKD3630 - Manual (Page 18)

1 7
5.) When you have completed programming the desired tracks press the PLAY/
PAUSE button to begin programmed playback.
The PLAY/PAUSE indicator comes ‘On’ and the
PROG. indicator continues flashing.
Playback will begin on the first track you programmed and will continue until
the last programmed track has played.
6.) When the program is completed the player stops and the display again briefly
shows the total tracks on the disc and then returns to the correct time. However
the program sequence remains in the memory.
To repeat the program sequence press the PROGRAM button and then press
the PLAY/PAUSE button again.
To cancel the Programmed sequence from memory, press the PROGRAM
button and then press the STOP button while the player is stopped. The
Program indicator goes ‘Off’.
Programmed Playback may also be canceled by switching to Radio function,
opening the CD door, or pressing the POWER ON/OFF button to shut the
power ‘Off’.
PROGRAMMED REPEAT PLAYBACK
You may use the Programmed Playback and Repeat features together to
continuously repeat a programmed sequence.
First program the desired sequence according to steps 1 through 4 above.
When Programmed Playback begins press the REPEAT button twice to select the
Repeat All Tracks mode.
The REPEAT and PLAY/PAUSE indicators
remain ‘On’. The PROG. indicator flashes.
The programmed sequence will be repeated continuously.
PROG. PLAY/PAUSE
FM ST.
PROG. PLAY/PAUSE REPEAT
FM ST.
CKD3630_060404.p65 4/6/2004, 15:19 17