Setting the wake-up times – Emerson Radio CKD3630 User Manual

Page 11

1 0

SETTING THE WAKE-UP TIMES

The procedure for setting the Alarm 1 and Alarm 2 wake up times is the same.

1.) First depress and hold the ALARM 1 button, then press the SKIP FWD.

button or the SKIP REV.

to adjust the display forward or back to the correct

Alarm 1 wake-up time. The display will move slowly at first, and then begin to

move rapidly.

2.) Be sure to set correctly for AM or PM. If the AM indicator is ‘On’, the wake-up

time displayed is AM. When the display shows the correct wake-up time, release

all the buttons.

3.) Depress and hold the ALARM 2 button, then press the SKIP FWD.

button

or the SKIP REV.

to adjust the display forward or back to the correct Alarm

2 wake-up time.

To check the wake-up times just press the ALARM 1 or ALARM 2 button at any

time. The display will show the wake-up time as long as the ALARM 1 or ALARM 2

buttons are depressed.

CKD3630_060404.p65

4/6/2004, 15:19