Operating instructions, Setting the clock – Emerson Radio CKD3630 User Manual

Page 10

OPERATING INSTRUCTIONS

• Make sure you have installed the back-up battery in the battery

compartment.

• Make sure you have extended the FM Lead Wire Antenna to its full

length.

• Connect the AC power cord plug to a 120V 60Hz AC outlet.

SETTING THE CLOCK

When the radio is connected to the AC outlet for the first time the display will show

flashing “12:00”.

1.) First depress and hold the TIME/DISPLAY button and then press the SKIP

FWD.

button or the SKIP REV.

button to adjust the display forward or

back to the correct time. The display will move slowly at first, and then begin to

move rapidly.

2.) Be sure to set correctly for AM or PM. If the AM indicator is ‘On’, the time

displayed is AM. When the display shows the correct time, release all the

buttons.

CKD3630_060404.p65

4/6/2004, 15:19