TA Triumph-Adler LP 4022 - Manual (Page 35)

OPERATION GUIDE 13
3 Press the Power Switch to On
( | ).
The printer begins to warm up.
IMPORTANT: If you install the toner container and switch on the power,
after a moment the indicators light in sequence from top to bottom. When
the printer is first switched on after toner installation, there will be a delay
of approximately 15 minutes before the printer gets ready to print. Once the
indicator lights, printer installation is complete.
Loading Software
Ensure the printer is plugged in and connected to the computer’s parallel
or USB port before installing software from the CD-ROM.
1 Switch on the PC and activate Windows.
NOTE: If the Welcome to the Found New Hardware Wizard dialog box
displays, select Cancel.
2 Insert the CD-ROM (Software Library) into the CD-ROM drive.
3 The installation program launches
and the License Agreement
displays.
Select View License Agreement to
read the information and select
Accept to proceed.
NOTE: If the installation program fails to launch, use Windows Explorer
to access the CD-ROM and select Setup.exe.