TA Triumph-Adler LP 4022 - Manual (Page 24)

Machine Parts
2 OPERATION GUIDE
Indicators
There are four indicators located on the top right of the printer. The
indicators are used to identify the status of the printer at any time. To
identify the printer status, check the indicators on the printer and then refer
to the table below.
NOTE: For other combinations of the four indicators, call for service.
Network Tool for Clients (a software included in the CD-ROM) will provide
more detailed information about the printer status.
Indicator Status Meaning
Ready
(Green)
Lit Indicates online status (printing is possible).
Flashing An error has occurred, but printing resumes when the
key is pressed.
Offline status. You cannot print, but the printer can receive
data.
The printer is in sleep mode.
Off Printing has stopped because an error has occurred.
Data
(Green)
Lit The printer is processing data.
Flashing The printer is receiving data.
Attention
(Red)
Lit The printer cover is open.
Flashing A paper jam has occurred.
The cassette is not inserted properly or the paper has run
out.
Off The printer status is normal.
Toner
(Red)
Lit The printer has stopped because the toner is exhausted.
Flashing The toner is running low.