Rose Electronics ServeView Pro - Manual (Page 10)

CABLES
SERVEVIEW PRO INSTALLATION AND OPERATIONS MANUAL 6
Cables
(See Appendix B for cable part numbers)
ServeView Pro to KVM station cables
The KVM cable connects a keyboard, video monitor, and mouse to the
ServeView Pro. The KVM cable is configured with a DB25M connector on
one end and a connector for the keyboard, video, and mouse cables on the
other end. These KVM cable connectors should be compatible with the
types of connectors that are on your KVM stations keyboard, monitor, and
mouse cables.
ServeView Pro to CPU cables
A CPU cable is used to connect each computer to the ServeView Pro. The
CPU cable connects from the DB25F CPU ports on the ServeView Pro to
the keyboard, video, and mouse ports on each CPU. This cable is
configured with a DB25M connector on one end and a connector for the
keyboard, video, and mouse on the other end. These CPU cable
connectors should be compatible with each CPUs keyboard, video, and
mouse port.
ServeView Pro Master to Slave unit cables
In systems needing access to additional CPUs, the ServeView Pro can be
cascaded to other ServeView Pros. To cascade an ServeView Pro to other
“Slave” units, you will need one DB25M to DB25M, switch-to-switch cable
for each expansion unit.
(Rose Electronics switch-to-switch cable part number CAB-CXVSMMnnn.)