Rose Electronics Xtensys - Manual (Page 29)

XTENSYS INSTALLATION AND OPERATIONS MANUAL
23
Save configuration
When changes are made to any
configuration, they must be
saved in flash memory to insure
that the changes will be active
after a power cycle. To save the
settings, select save and press
[Enter].
A YES/NO selection box will
display. Choose “YES” to save
the changes to flash memory on
all powered-on Xtensys
switches.
Choose “NO” for temporary or
incorrect changes. The
temporary settings will only be in
effect as long as power is
applied to the Unit. Once power
is cycled, unsaved changes are
lost and the previously saved
configuration settings will be
effective.
Figure 15. Save menu