Rose Electronics Xtensys - Manual (Page 25)

XTENSYS INSTALLATION AND OPERATIONS MANUAL 19
Configure Group
Figure 9. Configure Group
The configure group menu allows you to assign a computer to one or more groups. Users that are assigned a profile
that contains a specific group name can only access the computers within that group. It they try to access a computer
that is not within the assigned group, the error “Not in access group” will display in the connect box. The left
computer column displays the computer names. To change a group name, select it and press [Enter].
This menu is an array of groups (x) and computers (y). Moving the arrow key to the right from one plus (+) to another
plus (+) for a selected computer name changes to the next group. A plus (+) means the computer belongs to that
group, a blank means the computer is not in that group and cannot be accessed by a user assigned to this group. To
change the group membership, select the group for a selected computer and press the space bar to toggle between
the two states, + or blank. Default: (All computers in all groups)
The configure user, profile, and group menus all tie together to provide access control to the computers. A group
defines which computers in the system can and cannot be accessed. This group is assigned to a profile name. The
profile defines how the computers (defined by the group) can be accessed. The profile is then assigned to a user or
users.