Rose Electronics Xtensys - Manual (Page 13)

XTENSYS INSTALLATION AND OPERATIONS MANUAL
7
Typical Application
The flexibility of the Xtensys system
enables it to configure to almost any
system environment.
The User Station is available with one
local KVM Station connectors and
1, 4, or 8 RJ45 link ports.
The Switch is available with one local
KVM station connectors, 0, 2, 4, 8, or
16 remote KVM connections, and
8, 16, 32, 48, or 64 RJ45 CPU ports.
All connections from the User Station
to the Switch and from the Switch to
the computers, servers, and serial
devices use CATx cabling.
The total CATx cable length from the
User Station to the Switch and from the
Switch to the connected computers is
1,000 feet max.
Figure 1. Typical Application
Xtensys
User Station
Xtensys
Switch
User KVM
Station
Up to a total
of 1,000’ of
CATx cable