RIGOL DS6000 Series - Manual (Page 77)

RIGOL
DS6000 Quick Guide 27
To Use the Built-in Help System
The help system of this oscilloscope provides instructions for all the function keys
(including menu keys) at the front panel. Press HELP to open the help interface and
press again to close the interface. The help interface mainly consists of two parts.
The left is “Help Options” and you can use “Button” or “Index” to select. The right is
“Help Display Area”.
Figure 16 Help Information
Button:
Default mode. In this mode, you can press the buttons (except the power key, the
knob
, menu page up/down key / and the Wavefinder knob ) at the
front panel directly to get the corresponding help information of that button in the
“Help Display Area”.
Use
to select “To Index” and then press the knob to switch to Index mode.
Index:
In this mode, use
to select the item that needs to get help (for example: “Band
Width”). The item being selected currently is displayed in green. Press the knob to
get the corresponding help information in the “Help Display Area”.
Use
to select “To Button” and then press the knob to switch to Button mode.
Help Options Help Display Area